SP-89-2003
View Larger Image

SP-89-2003

Pipe Hangers and Supports - Fabrication and Installation Practices

This Standard Practice was developed by a cooperative effort of representatives of the pipe hanger manufacturers. It is based on the best current practice and on the collective experience of the industry. There are three companion standards - MSS SP-58 and MSS SP-69 relate to hanger materials, design, manufacture, selection and application; MSS SP-127 relates to the design, selection, and application of bracing for piping systems subject to seismic – wind – dynamic loading. In addition, the MSS Technical Committee 403 has developed guidelines for pipe supports contractual relationships and on hanger terminology as covered in MSS SP-77 and MSS SP-90 respectively.
Scope:
This Standard Practice establishes recommended procedures for detailing, fabrication, and installation of pipe hangers and supports. These procedures supplement, but do not replace, those of the manufacturer.
NOTICE:
This Standard Practice has been withdrawn as an active MSS Standard effective 6/06/2014. The contents of this Standard Practice is now part of ANSI/MSS SP-58-2009, which can officially be utilized and referenced in place of SP-89. The withdrawn standard will remain available from MSS as a historical document.

     

 
You may also be interested in these products:
SP-69-2003
SP-69-2003

SP-58-2009
SP-58-2009

Today is Wednesday
January 23, 2019

MSS Member Login

MSS Scholarships

MSS Apparel

We Accept:
VISA  MasterCard  American Express
Discover  Diners Club 
Site Secured by:

Like us on:

Accept Credit Cards Online