MSS Banner The Technical Voice of the Industry
SP-99-1994 (R 2005)
View Larger Image

SP-99-1994 (R 2005)

Instrument Valves

This Standard Practice applies to small valves and manifolds developed for and predominantly used in instrument, control and sampling piping systems. It covers steel and alloy valves of 1” nominal pipe size and smaller, and pressure ratings of 10,000 psi and lower at 100°F.
This Standard Practice applies to instrument valve designs including but not limited to needle valves, packless valves, ball valves, plug valves, check valves and manifold valves. Instrument valves are generally of proprietary design; this Standard Practice is not intended to define or limit designs, construction, performance, envelope dimensions, or valve types.
The application of valve type, size, rating, materials of construction, and suitability for the service are the responsibility of the purchaser and are outside the scope of this standard.
The manufacturer shall provide pressure ratings for temperatures above 100°F. This temperature is the temperature of the pressure-containing shell of the component. In general, this temperature is the same as that of the contained fluid. Use of a pressure rating corre-sponding to a temperature other than that of the contained fluid is the responsibility of the user, subject to the requirements of applicable codes and regulations.

     


Today is: Friday
December 13, 2019

MSS Member Login

MSS Scholarships

MSS Apparel

We Accept:
VISA  MasterCard  American Express
Discover  Diners Club 
Site Secured by:

Like us on:

Accept Credit Cards Online