MSS Banner The Technical Voice of the Industry

Projects

Active American National Standard Projects (ANSI/MSS)

Updated: November 2020  Opened: October 2020

Project: 20-19-ANS  Committee: C-304  Standard: SP-55-2011 Action: Revise

QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES (ANSI-APPROVED AMERICAN NATIONAL STANDARD)

Staff submitted PINS form. PINS period is over on 12/13/2020.


Updated: November 2020  Opened: March 2017

Project: 17-01-ANS  Committee: C-115  Standard: SP-105-2016 Action: New

INSTRUMENT VALVES FOR CODE APPLICATIONS

Committee reported they will continue the ANSI canvas process concurrently with the SP-105 review/revision as of 5/9/2019.


Updated: November 2020  Opened: September 2020

Project: 20-04-ANS  Committee: C-304  Standard: SP-138-2014 Action: Revise

QUALITY STANDARD PRACTICE FOR OXYGEN CLEANING OF VALVES AND FITTINGS (ANSI-APPROVED AMERICAN NATIONAL STANDARD)

In ballot with MSS committees for approval (11/4/2020).


Updated: October 2020  Opened: October 2020

Project: 20-20-ANS  Committee: C-409  Standard: SP-135-2016 Action: Revise

HIGH PRESSURE KNIFE GATE VALVES (ANSI-APPROVED AMERICAN NATIONAL STANDARD)

ANS PINS form submitted (10/29/2020).


Closed (ANSI/MSS) Projects

Closed: November 2020

Project: Unassigned  Committee: C-501  Standard: SP-142-2012 Action: New

[PROPOSED NEW ANS] EXCESS FLOW VALVES FOR FUEL GAS SERVICE, NPS 1½ THROUGH 12


Closed: October 2020

Project: 19-09-ANS  Committee: C-110  Standard: SP-44-2016 Action: Revise

STEEL PIPELINE FLANGES (ANSI-APPROVED AMERICAN NATIONAL STANDARD) THIS IS A 2017 REISSUE AND REPLACES ORIGINAL 2016 VERSION.


Closed: October 2020

Project: 19-10-ANS  Committee: C-114  Standard: SP-144-2013 Action: Revise

PRESSURE SEAL BONNET VALVES (ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: June 2018

Project: 14-18-ANS  Committee: C-409  Standard: SP-135-2016 Action: New

HIGH PRESSURE KNIFE GATE VALVES


Closed: November 2016

Project: 16-19-ANS  Committee: C-110  Standard: SP-44-2016 Action: Revise

STEEL PIPELINE FLANGES (REVISED ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: September 2018

Project: 17-02-ANS  Committee: C-302  Standard: SP-25-2018 Action: Revise

STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS (ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: September 2018

Project: 13-03-ANS  Committee: C-403  Standard: SP-58-2018 Action: Revise

PIPE HANGERS AND SUPPORTS - MATERIALS, DESIGN, MANUFACTURE, SELECTION, APPLICATION, AND INSTALLATION (ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: December 2017

Project: 15-22-ANS  Committee: C-402  Standard: SP-122-2017 Action: New

PLASTIC INDUSTRIAL BALL VALVES


Closed: April 2019

Project: 13-02-ANS  Committee: C-108  Standard: SP-114-2007 Action: Revise

CORROSION RESISTANT PIPE FITTINGS THREADED AND SOCKET WELDING CLASS 150 AND 1000 (ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: April 2017

Project: 16-10-ANS  Committee: C-302  Standard: SP-96-2011 Action: Revise

GUIDELINES ON TERMINOLOGY FOR VALVES AND FITTINGS (ANSI-APPROVED AMERICAN NATIONAL STANDARD)


Closed: October 2015

Project: 13-22-ANS  Committee: C-114  Standard: SP-134-2012 Action: New

VALVES FOR CRYOGENIC SERVICE, INCLUDING REQUIREMENTS FOR BODY/BONNET EXTENSIONS


Closed: October 2015

Project: 13-23-ANS  Committee: C-114  Standard: SP-144-2013 Action: New

PRESSURE SEAL BONNET VALVES


Closed: March 2014

Project: 06-04-ANS  Committee: C-403  Standard: SP-69-2003 Action: Withdraw

ANSI/MSS SP-69-2003


Active MSS Standard Projects (New Standards)

Updated: November 2020  Opened: February 2010

Project: 10-05  Committee: C-403  Standard: New SP Action: New

CABLE SUSPENSION OF PIPE – MATERIALS, SELECTION, APPLICATION, AND INSTALLATION

Committee gathering documentation to help resolve negative comments from last ballot in January. Documentation to be discussed in December meeting (10/23/2020).


Updated: November 2020  Opened: April 2015

Project: 17-19  Committee: C-114  Standard: New SP Action: New

SPECIAL HIGH-PRESSURE GAS TEST PROCEDURES FOR VALVES

In committee ballot review (10/23/2020).


Updated: November 2020  Opened: May 2019

Project: 19-08  Committee: C-102  Standard: New SP Action: New

DUCTILE IRON FLANGES FOR CWP SERVICE

CC assigned PN and approved Title and Scope (5/2019). In committee development.


Updated: November 2020  Opened: December 2019

Project: 20-01  Committee: C-308  Standard: New SP Action: New

PACKING AND GASKETS FOR OXYGEN SERVICE

In committee development (1/14/2020).


Updated: November 2020  Opened: October 2018

Project: 20-02  Committee: C-408  Standard: New SP Action: New

DESIGN REQUIREMENTS FOR ACTUATOR-TO-VALVE MOUNTING COMPONENTS

Title/Scope approved and PN assigned. Waiting on TG to create first draft (3/16/2020).


Updated: November 2020  Opened: May 2020

Project: 20-03  Committee: C-308  Standard: New SP Action: New

EXAMINATION METHODOLOGY AND ACCEPTANCE CRITERIA FOR GRAPHITIC-BASED PACKING AND GASKETS FOR VALVES

In committee development (5/21/2020).


Updated: October 2020  Opened: May 2018

Project: 18-02  Committee: C-406  Standard: SP-100-2015 Action: Revise

QUALIFICATION REQUIREMENTS FOR ELASTOMER DIAPHRAGMS FOR NUCLEAR SERVICE DIAPHRAGM VALVES

In CC ballot ending 11/29/2020.


Updated: April 2020  Opened: May 2016

Project: 16-20  Committee: C-114  Standard: New SP Action: New

GUIDELINES FOR CLASSIFYING THE SEVERITY OF VALVE SERVICE CONDITIONS

In committee ballot review (4/27/2020).


Updated: February 2020  Opened: February 2009

Project: 09-16  Committee: C-310  Standard: New SP Action: New

MODIFICATION OF QUARTER TURN VALVES

Chair resolving last ballot comments (1/13/2020).


Updated: April 2019  Opened: February 2009

Project: 09-18  Committee: C-310  Standard: New SP Action: New

INSTALLATION OF GEAR & POWER ACTUATORS

Awaiting chairs approval to post ballot (4/17/2019)


Updated: April 2019  Opened: April 2016

Project: 16-09  Committee: C-110  Standard: New SP Action: New

LARGE DIAMETER SLIP-ON AND LAP-JOINT FLANGES

In TF Development (as of 2/26/2019)


Updated: April 2015  Opened: May 2011

Project: 11-23  Committee: C-304  Standard: New SP Action: New

PROTECTION OF VALVES, FITTINGS, AND ACTUATORS FROM DAMAGE DURING SURFACE PREPARATION AND APPLICATION OF COATINGS

"In C-304 TF Revision (Ballot expected soon and photos to be included--waiting on TF Chair Action--1. Review draft, and 2. create photos) (No Joint Work with SSPC At This Time--SSPC Members May Review a Draft).


Closed MSS Standard Projects

Closed: November 2020

Project: Unassigned  Committee: C-102  Standard: New SP Action: New

UNAPPROVED PROJECT--DUCTILE IRON FLANGES FOR CWP SERVICE


Closed: November 2020

Project: 17-20  Committee: C-115  Standard: New SP Action: New

INSTRUMENT VALVE DESIGN QUALIFICATIONS FOR LOW FUGITIVE EMISSION SERVICE


Closed: October 2020

Project: 18-09  Committee: C-112  Standard: SP-111-2015 Action: Revise

GRAY-IRON AND DUCTILE-IRON TAPPING SLEEVES (NOTE: A 2017 AMENDMENT HAS BEEN ISSUED AND INSERTED INTO THIS STANDARD)


Closed: October 2020

Project: 18-08  Committee: C-112  Standard: SP-108-2015 Action: Revise

RESILIENT-SEATED CAST IRON ECCENTRIC PLUG VALVES


Closed: October 2020

Project: 18-07  Committee: C-112  Standard: SP-98-2015 Action: Revise

PROTECTIVE COATINGS FOR THE INTERIOR OF VALVES, HYDRANTS, AND FITTINGS


Closed: October 2020

Project: 18-06  Committee: C-110  Standard: SP-44-2016 Action: Revise

STEEL PIPELINE FLANGES (ANSI-APPROVED AMERICAN NATIONAL STANDARD) THIS IS A 2017 REISSUE AND REPLACES ORIGINAL VERSION.


Closed: October 2020

Project: 18-05  Committee: C-304  Standard: SP-94-2015 Action: Revise

QUALITY STANDARD FOR FERRITIC AND MARTENSITIC STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - ULTRASONIC EXAMINATION METHOD


Closed: October 2020

Project: 18-04  Committee: C-407  Standard: SP-150-2015 Action: Revise

VALVES FOR USE IN HYDROGEN PEROXIDE SERVICE


Closed: October 2020

Project: 16-18  Committee: C-304  Standard: New SP Action: New

QUALITY STANDARD FOR PHOSPHATE SURFACE PROTECTIVE COATINGS FOR VALVES, FITTINGS, AND RELATED STEEL PIPING COMPONENTS


Closed: October 2020

Project: 16-17  Committee: C-106  Standard: New SP Action: New

DUCTILE IRON, METAL-SEATED, NON-LUBRICATED, ECCENTRIC PLUG VALVES


Closed: February 2019

Project: 10-01  Committee: C-406  Standard: SP-88-2015 Action: Revise

Diaphragm Valves


Closed: February 2019

Project: 18-03  Committee: C-308  Standard: SP-149-2015 Action: Revise

PREFORMED ELASTOMERIC AND POLYTETRAFLUOROETHYLENE (PTFE) V-RING PACKING SETS FOR WATERWORKS VALVES


Closed: June 2018

Project: 17-03  Committee: C-409  Standard: SP-154-2018 Action: New

LOW PRESSURE DOUBLE BLOCK AND BLEED TYPE KNIFE GATE VALVES


Closed: June 2018

Project: 15-02  Committee: C-304  Standard: SP-155-2018 Action: New

PLASTIC-LINED FERROUS METAL VALVES


Closed: November 2017

Project: 09-17  Committee: C-310  Standard: New SP Action: New

(NEW SP-153) MODIFICATION OF NEW WATER WORKS VALVES


Closed: October 2017

Project: 13-21  Committee: C-409  Standard: SP-152-2017 Action: New

DOUBLE BLOCK AND BLEED TYPE KNIFE GATE VALVES


Closed: June 2017

Project: 14-15  Committee: C-407  Standard: New SP Action: New

VALVES FOR USE IN HYDROGEN PEROXIDE SERVICE


Closed: June 2017

Project: 15-01  Committee: C-409  Standard: New SP Action: New

PRESSURE TESTING OF KNIFE GATE VALVES


Closed: June 2017

Project: 09-20  Committee: C-308  Standard: New SP Action: New

PREFORMED ELASTOMERIC AND POLYTETRAFLUOROETHYLENE (PTFE) V-RING PACKING SETS FOR WATERWORKS VALVES


Closed: October 2014

Project: 09-06  Committee: C-105  Standard: SP-95-2006 Action: Revise

SWAGE(D) NIPPLES AND BULL PLUGS




Today is: Monday
November 23, 2020

MSS Member Login

MSS Brochure

MSS Scholarships

MSS Apparel


We Accept:
VISA  MasterCard  American Express
Discover  Diners Club 
Site Secured by:

Like us on:

Accept Credit Cards Online