Standard Practice Price List

Publication
Number
STANDARD PRACTICE TITLE Price
$ U.S. *
Buy Now
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings
$77.00
Buy Now
Spot Facing for Bronze, Iron, and Steel Flanges
$77.00
Buy Now
Standard Marking System for Valves, Fittings, Flanges, and Unions (ANSI-approved American National Standard)
$165.00
Buy Now
Corrosion-Resistant Gate, Globe, Angle, and Check Valves with Flanged and Butt Weld Ends (Classes 150, 300, & 600)
$109.00
Buy Now
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications (Note: 1 2015 Amendment has been added to this standard)
$114.00
Buy Now
Steel Pipeline Flanges (ANSI-approved American National Standard) This is a 2017 Reissue and replaces original version.
$220.00
Buy Now
Bypass and Drain Connections
$73.00
Buy Now
Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
$77.00
Buy Now
Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Magnetic Particle Examination Method
$109.00
Buy Now
Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Radiographic Examination Method
$109.00
Buy Now
Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components - Visual Method for Evaluation of Surface Irregularities (ANSI-approved American National Standard)
$167.00
Buy Now
Pipe Hangers and Supports - Materials, Design, Manufacture, Selection, Application, and Installation (ANSI-approved American National Standard)
$295.00
Buy Now
Connecting Flange Joints between Tapping Sleeves and Tapping Valves
$75.00
Buy Now
Pressure Testing of Valves
$97.00
Buy Now
High Pressure Chemical Industry Flanges and Threaded Stubs for Use with Lens Gaskets
$77.00
Buy Now
Butterfly Valves (Note: a 2017 Errata Sheet has been issued and inserted into this standard)
$104.00
Buy Now
Butterfly Valves (Note: a 2017 Errata Sheet has been issued and inserted into this standard)
$104.00
Butterfly Valves (Note: a 2017 Errata Sheet has been issued and inserted into this standard)
$104.00
Buy Now
Butterfly Valves (Note: a 2017 Errata Sheet has been issued and inserted into this standard)
$107.00
Buy Now
High Pressure Butterfly Valves with Offset Design
$107.00
Buy Now
Gray Iron Gate Valves, Flanged and Threaded Ends
$97.00
Buy Now
Gray Iron Swing Check Valves, Flanged and Threaded Ends (Note: a 2013 Errata Sheet has been issued and inserted into this standard)
$97.00
Buy Now
Ball Valves with Flanged or Butt-Welding Ends for General Service
$92.00
Buy Now
High-Strength, Wrought, Butt-Welding Fittings
$134.00
Buy Now
Gray Iron Plug Valves, Flanged and Threaded Ends
$92.00
Buy Now
Socket Welding Reducer Inserts
$73.00
Buy Now
Bronze Gate, Globe, Angle, and Check Valves
$109.00
Buy Now
Stainless-Steel or Stainless-Steel-Lined, Bonnetless, Knife Gate Valves with Flanged Ends
$97.00
Buy Now
Class 3000 and 6000 Pipe Unions, Socket Welding and Threaded (Carbon Steel, Alloy Steel, Stainless Steels, and Nickel Alloys)
$122.00
Buy Now
Gray Iron Globe & Angle Valves, Flanged and Threaded Ends
$97.00
Buy Now
Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators
$122.00
Buy Now
Factory-Made Butt-Welding Fittings for Class I Nuclear Piping Applications
$92.00
Buy Now
Diaphragm Valves
$122.00
Buy Now
Guidelines for Manual Operation of Valves
$77.00
Buy Now
MSS Valve User Guide
$89.00
Buy Now
Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Liquid Penetrant Examination Method
$109.00
Buy Now
Quality Standard for Ferritic and Martensitic Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping Components - Ultrasonic Examination Method
$109.00
Buy Now
Swage(d) Nipples and Bull Plugs
$122.00
Buy Now
Terminology for Valves, Fittings, and Their Related Components (ANSI-approved American National Standard)
$166.00
Buy Now
Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded, and Buttwelding Ends
$97.00
Buy Now
Protective Coatings for the Interior of Valves, Hydrants, and Fittings
$77.00
Buy Now
Instrument Valves
$77.00
Buy Now
Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Valves
$122.00
Buy Now
Part-Turn Valve Actuator Attachment - FA Flange and Driving Component Dimensions and Performance Characteristics
$77.00
Buy Now
Multi-Turn Valve Actuator Attachment - Flange and Driving Component Dimensions and Performance Characteristics
$77.00
Buy Now
Wrought Copper Solder-Joint Pressure Fittings
$77.00
Buy Now
Instrument Valves for Code Applications
$77.00
Buy Now
Cast Copper Alloy Flanges and Flanged Fittings: Class 125, 150, and 300
$84.00
Buy Now
Resilient-Seated Cast Iron Eccentric Plug Valves
$97.00
Buy Now
Weld-Fabricated Copper Solder-Joint Pressure Fittings (Note: a 2012 Errata Sheet has been issued and inserted into this standard)
$77.00
Buy Now
Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends (Note: a 2010 Errata Sheet has been issued and inserted into this Standard Practice)
$97.00
Buy Now
Gray-Iron and Ductile-Iron Tapping Sleeves (Note: a 2017 Amendment has been issued and inserted into this standard)
$77.00
Buy Now
Quality Standard for Evaluation of Cast Surface Finishes - Visual and Tactile Method. This SP must be used with a 10-surface, three dimensional Cast Surface Comparator, which is a necessary part of the Standard. Price for both is $175.00. The Comparators may be sold separately at $85.00 each and the Standard may be sold for $90.00. Same quantity discounts apply on total order.
$175.00
Buy Now
Connecting Joints between Tapping Machines and Tapping Valves
$75.00
Buy Now
Corrosion Resistant Pipe Fittings Threaded and Socket Welding Class 150 and 1000 (ANSI-approved American National Standard)
$104.00
Buy Now
Excess Flow Valves, NPS 1-1/4 and Smaller, for Fuel Gas Service
$77.00
Buy Now
Service-Line Valves and Fittings for Drinking Water Systems
$109.00
Buy Now
Bellows Seals for Globe and Gate Valves
$92.00
Buy Now
Factory-Made Wrought Belled End Pipe Fittings for Socket-Welding (Note: a 2014 Errata Sheet has been issued and inserted into this Standard Practice)
$92.00
Buy Now
Flexible Graphite Packing Sealing for Rising Stem Valves
$109.00
Buy Now
Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves
$114.00
Buy Now
Plastic Industrial Ball Valves
$77.00
Buy Now
Non-Ferrous Threaded and Solder-Joint Unions for Use With Copper Water Tube
$77.00
Buy Now
Fabricated Tapping Sleeves (Note: a 2017 Amendment has been issued and inserted into this standard)
$77.00
Buy Now
Gray Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves
$97.00
Buy Now
In-Line, Spring-Assisted, Center-Guided Check Valves
(Carbon, Alloy Steel, Stainless Steel, & Nickel Alloys)
$109.00
Buy Now
Bracing for Piping Systems: Seismic-Wind-Dynamic Design, Selection, and Application
$141.00
Buy Now
Ductile Iron Gate Valves
$145.00
Buy Now
Copper-Nickel Socket-Welding, Fittings, and Unions
$97.00
Buy Now
Bellows Seals for Instrument Valves
$102.00
Buy Now
Metallic Manually Operated Gas Distribution Valves
$102.00
Buy Now
Compression Packing Systems for Instrument Valves
$77.00
Buy Now
Valves for Cryogenic Service, including Requirements for Body/Bonnet Extensions (ANSI-approved American National Standard)
$165.00
Buy Now
High Pressure Knife Gate Valves (ANSI-approved American National Standard)
$119.00
Buy Now
Ductile Iron Swing Check Valves (A 2017 Amendment has been added to this Standard Practice)
$131.00
Buy Now
Quality Standard for Positive Material Identification of Metal Valves, Flanges, Fittings, and Other Piping Components
$105.00
Buy Now
Quality Standard Practice for Oxygen Cleaning of Valves and Fittings (ANSI-approved American National Standard)
$140.00
Buy Now
Copper Alloy Gate, Globe, Angle, and Check Valves for Low Pressure/Low Temperature Plumbing Applications
$109.00
Buy Now
Quality Standard Practice for Preparation of Valves and Fittings for Silicone-Free Service
$87.00
Buy Now
Multi-Turn and Check Valve Modifications
$122.00
Buy Now
Excess Flow Valves for Fuel Gas Service, NPS 1½ through 12
$87.00
Buy Now
Live-Loaded Valve Stem Packing Systems
$126.00
Buy Now
Pressure Seal Bonnet Valves (ANSI-approved American National Standard)
$139.00
Buy Now
Metal Ball Valves for Low Pressure/Low Temperature Plumbing Applications
$130.00
Buy Now
High Pressure, Lug- and Wafer-Type, Iron and Ductile Iron Knife Gate Valves
$116.00
Buy Now
Quality Standard for Steel Castings Used in Standard Class Steel Valves --- Sampling Method for Evaluating Casting Quality
$102.00
Buy Now
Low Pressure Flanged or Lugged Carbon Steel and Iron or Ductile Iron, Cast or Fabricated, Bonnetless, Knife Gate Valves without Liners
$107.00
Buy Now
Preformed Elastomeric and Polytetrafluoroethylene (PTFE) V-Ring Packing Sets for Waterworks Valves
$104.00
Buy Now
Valves for Use in Hydrogen Peroxide Service
$100.00
Buy Now
Pressure Testing of Knife Gate Valves
$99.00
Buy Now
Knife Gate Valves for Double Block and Bleed
$94.00
Buy Now
Modification of New Water Works Valves
$112.00

Complete Set

(ONE FULL SET $9,840.00 LESS 20% $1,968.00 = $7,872.00)

$7,872.00

* Listed retail price for single Hard Copy or PDF version.



Today is Monday
December 18, 2017

MSS Member Login

MSS Scholarships

MSS Apparel

We Accept:
VISA  MasterCard  American Express
Discover  Diners Club 
Site Secured by:

Accept Credit Cards Online